【教育与工作简历】
  2017-9至2022-6，东北大学，材料加工工程，博士；
   2015-9至2017-7，东北大学，材料加工工程，硕士；
   2011-9至2015-7，辣妹聊天室，材料科学与工程（材料加工工程方向），学士。
【主要工作成就】
  

【代表性学术著作、论文】
  (1) Jiang, T., Zhang, W., Su, Z., Xue, Y., Wang, S., Zhao, H., ... & Xu, G. (2023). Improving the wear resistance of 50 wt.% Si particle-reinforced Al matrix composites treated by over-modification with a Cu-P modifier. Tribology International, 108247.
   (2) Zhou, C., Jiang, T*., Yu, W., Xu, B., Chen, J., Sun, Y., ... & Xu, G. (2021). A novel research on the solute redistribution phenomenon of sub-rapid twin-roll cast Al-50 wt.% alloy treated by semi-solid heat treatment. Journal of Materials Research and Technology, 15, 6295-6311.
   (3) Jiang, T., Yu, C., Xu, B., Yu, W., Xu, G., Li, Y., ... & Wang, G. (2021). A novel investigation on the influence of Cu-P modifier on the microstructure, mechanical performance, and melting process of Al-50Si alloys treated by overheating. Progress in Natural Science: Materials International, 31(3), 461-470.
   (4) Li, Y., Jiang, T.*, Wei, B., Xu, B., Xu, G., & Wang, Z. (2020). Microcharacterization and mechanical performance of an Al-50Si alloy prepared using the sub-rapid solidification technique. Materials Letters, 263, 127287.
   (5) Tao Jiang, Boyue Xu, Guangming Xu*, et al. (2019). The influence of various Mg contents on the microstructures, mechanical properties and thermal expansion behaviors of P-modified Al-50Si alloys. Journal of Materials Science: Materials in Electronics, 30(21): 19362-19373.
   (6) Tao Jiang, Jinyu Fu, Guangming Xu*, et al. (2019). The influence on microstructure and wear behavior of hypereutectic Al-50Si alloy with various Cu-P admixture contents and cooling rates. Surface Topography: Metrology and Properties, 2019, 7(3): 035008.
   (7) Jiang, T., Li, S., Yu, C., Fu, J., Wei, B., Luo, L., & Xu, G. (2019). The evolution on the microstructure and thermal expansion behavior of Al-50Si alloy with different P contents. Journal of Materials Science: Materials in Electronics, 30, 6786-6794.
   (8) Tao Jiang, Liangliang Luo, Guangming Xu*, et al. (2018). Vertical twin-roll cast Al-50Si alloy with different Mg content. Materials Research Express, 5(9): 096520.
【专利】
   1. 许光明, 姜涛, 李勇, 王昭东, 王国栋. 一种高硅铝合金薄板制备工艺: 中国, ZL 2018 1 1552942.5[P]. 2020-09-11.